Low Cost and Low Noise Plate Tube Type Heat Exchanger can Freeze and not Leak

    We are top quality ice machines manufacturer .Our products are cube ice machine ,ice block machine ,ice tube machine ,ice flake machine ,ice plate machine ,cold room ,ultra-low temperature chiller.And the evaporator has shell-and-tube heat exchanger ,plate type heat exchanger and plate-and-tube type heat exchanger .

    However ,plate tube type heat exchanger has simple structure, and is low cost, easy to damage, and no drive fan, so not only reliable and low noise when plate and tube heat exchanger pipe work due to the temperature of the working fluid along the condensing coil decreasing backplane uneven temperature, and therefore non-isothermal heat back natural convection and radiation heat transfer, while there are also thermal itself.It is ok to freeze inside the tube .But shell-and-tube heat exchanger and plate type heat exchanger both can't freeze inside them otherwise they damage.

    The ultra-low temperature chiller use plate tube type heat exchanger .There are two kinds of ultra-low temperature evaporators which are ammonia system evaporators and fluorine system evaporators .

                         ammonia system evaporator

                           fluorine system evaporator

Cold Storage to Store 15tons of Ice Block for Every Customer

    When you buy large ice block machine ,and produce a large of block ices ,then where you should put ices ?I suggest you buy a cold storage for store ices .Now I cube ice machine officer will introduce you our company'cold storage .

  Cold storage is widely used in food process factory, dairy factory, pharmaceutical factory,chemical factory, fruit and vegetable warehouse, egg storage, hotel, supermarket, hospital, blood bank,troops and laboratory.

    Cold room has the following features:

1. Nice apperance: The insulation panel and framework are available in dozens of colors which are to be elected in satisfactory harmony with various styles of buildings.

2. Insulation: Polyurethane or polystyrene with low thermal conductivity and high strength is utilized, achieving good insulation performance.

3. Short construction period

4.Fast installation

5. Hygienic conditions of food inside cold stores are up to the standards.

6. Durable building structure, super quality material

7. Temperature:-20°C~-30°C or -10°C~-18°C or 8°C~-5°C8. Size: Customization

    The complete set of cold room includes 3 main parts:

1. Cold room panels

2. Air cooler

3. Condensing unit

4. Accessories

Commercial and Industrial Ice Flake Machine for fruit and vegetable preservation for Oversea Friends

   We manufacture ice flake machine .It has commercial and industrial use .I ,ice block machine officer will tell you the details . 

   Commercial flaker machine is widely used in supermarket preservation, seafood restaurant, food processing, fruit and vegetable preservation, make the seafood, fresh meat and meat products more fresh.

  Industrial flaker machine is widely used in food processing, chemical manufacturing, bio-technology, wine industry, fruit and vegetable preservation and mine cooling, etc.

    Sea water flake ice machine is designed with intelligent PLC control system, stable running,high -efficiency and simple maintenance.

    Our evaporators are made up of stainless steel 304. Its evaporating area is greatly expanded and the ice is more beautiful and dryer by its inner spiral chute design. So it never distorts even long time working in low temperature and low pressure, which greatly increase the working life of the flake ice machine system.

    Flake Ice Maker Feature:

1.The temperature of ice is lower and it can reach 8 celsius degree below zero

2.Ice is dry and transparent, good looking shape, non-caked, good mobility and sanitary.

3.It has the flake shape so that it has big contact area with refrigerating products and the effect is excellent.

4.Flake shape and no sharp edges, cannot destroy refrigerating products and it is beneficial for storage and transportation.

5.The thickness of flake ice is 1mm-2mm. No need to crush and can use at any time.

    Flake Ice Machine technical parameters:

NO.	Production	capacity of refrigeration	Weight of Machine	Machine Dimension
--	Ton/D	Kw	kg	L*W*H(mm)
BF500	0.5	3.75	160	1220*900*1000
BF1000	1.0	8.85	210	1300*960*1200
BF2000	2.0	17.84	360	1500*1200*1350
BF3000	3.0	24.15	1000	1800*1250*1400
BF5000	5.0	35.10	1100	2100*1250*1500
BF6000	6.0	45.85	1100	2500*2040*2200
BF8000	8.0	42.70	1300	2100*1250*1500
BF10000	10.0	76.10	1500	2300*1750*1740
BF15000	15.0	110.9	3200	3200*2100*2000
BF20000	20.0	151.0	4200	3400*2200*2560
BF25000	25.0	180.0	5000	3800*2300*2560
BF30000	30.0	214.2	6000	4500*2300*2800
BF40000	40.0	226.1	7500	7800*2100*2480
BF50000	50.0	268.1	10000	5000*2300*3000
BF60000	60.0	278.4	12000	5500*2300*3200

Flake Ice Machine ,the Optimized Fresh Products to Replace others in many Industry

    Why say that flake ice machine is the optimized fresh products to replace other in many industry?There are 5 areas as follows:

   

     

    1.Large contact area with the rapid cooling

    Since the flat shape characteristics of ice , it is greater than the surface area of a variety of other shapes with the weight of the ice . The larger the contact surface area , the better cooling effect . In comparison , for example, the minimum value of a ton of ice surface area of 1579 square meters, and other types of ice such as tube ice , ice particles can only provide 395 to 1294 square meters , so ice cooling efficiency than the tube ice and ice particles high 2-5 times 

   

     2.Low production costs

    Flake ice production cost is very economical , will be 16 degrees Celsius water cooling becomes one ton piece of ice just offer 85 kWh.

   

     3.Excellent food safety

    Flake ice texture dry, soft non- acute , can be packaged refrigerated foods play a protective role in the packaging process . Its flat shape will be the smallest possible physical harm to be refrigerated .

   

     4.Mix thoroughly

    Due to the huge surface area of ??the ice sheet , the heat exchange process is quick , can rapidly melting ice into water , take away the heat , the humidity of the mixture is increased .

    

     5.Transportation convenient storage

    Since the texture of the ice sheet was dried , thus less prone to adhesion formation in cold storage , the coil during transport , storage easier transport.

We cube ice machine and other ice machine factory has 0.5-60tons production capacity flake ice machine .We have good quality with high sell all over the world .

Fluorine System R22 and R507a for Ice Machine Industry

    Fluorine ,have you ever heard the gas? The fluorine refrigerating gas is a kind of gas without color and smell. 

    R22 

R22 overall performance is excellent, with good thermal performance. Such as: operating pressure is moderate; cooling capacity per unit volume after ammonia; isentropic index below ammonia, therefore, at the same pressure ratio, exhaust temperature lower than the ammonia; and non-toxic, non-burning and no danger of explosion and so on. R22 and gradually decreased with the emergence of its price, it is air conditioning and refrigeration systems to a wide range of applications. In addition, all Freon resistant copper fluoride varnish and motor are ineffective, therefore, to make various types of compact hermetic compressor to be used. At present, the various types of home air conditioning and cold (hot) water unit, most choose R22 refrigerant.

However ,R22 has the lower cost than R507a.The former is about 30thousand ,and the latter is about 140thousand.We ice block machine and other ice machine use two kinds .

    R507a

For R507A, R404A and R22 carried out in cryogenic applications, theoretical performance analysis is pure refrigerants R22 refrigerant leak -. Charging times has no effect on unit performance and R507A and R404A as refrigerant mixtures, at five times the leak -. Charging after the injection, R507A volumetric cooling capacity is essentially the same, while the amount of R404A refrigerant volume reduced by about 1.6% in the same compressor and the same operating conditions, R507A refrigeration unit than R22 units large 7% ~ 13%, R404A large units than R22 refrigeration unit about 4% to 10% at high ambient temperatures, the efficiency of the unit is slightly higher than R22 R507A and R404A;. ambient temperature is low, the efficiency R507A and R404A unit is slightly higher than the R22.

Electrical Timers Left on Overnight

 Areas such as walk-in coolers or your dry store room don need to be illuminated all day long. Turning off lights as you leave typically unused areas is a great way to save money on your energy bill. Again, electrical timers can be used in these areas especially if they are commonly forgotten and left on overnight.

 The kind of lighting you use makes a significant difference in your energy consumption too. Florescent lighting uses 1/4 to 1/3 less energy than normal bright lights. Replacing bulbs with higher efficient options will show a lower cost in your monthly bill.The cube ice machine factory install the electrical timers.

 Energy Saver1: Higher efficiency bulbs can be used in areas that require constant lighting. Replace incandescent lights in your walk in cooler with fluorescent lights which are cooler and consume less energy.

Just like leaving the lights on in your home, leaving equipment to run idly will cost you hundreds of dollars for unused energy. By turning off your inactive equipment, it saves energy and plenty of cash on your next gas, electric, or water bill. For those times when you forget to turn off equipment after closing, electrical timers can be placed on outlets to automatically flip off equipment when you aren around.

You can turn the whole griddle off, but you can turn off some of the burners during slower business hours. Turn off all the griddle burners except leaving one burner on for off-peak hours. This will save you energy while still keeping kitchen services available.